Algoma Wisconsin
LEED Calculator
Project Information
Step 1: Enter Your Project Information or a Project ID to Recall a Saved Calculation.
  Project Name: Project ID: Recall  
  Distributor: Edit Date:  
  Job Site Zip Code: Job Site Distance: Enter Job Site Zip Code  
 
Job Data Entry and LEED Calculations
 
Step 2: Enter the total dollars you charged your customer for each type of door.
Step 3: Click the 'Yes' box if the door is UREA Formaldehyde Resin Free.
 
Door Type Total Dollars Charged Resin Free
PC-5 NOVODOR No
PC-5 NOVODOR, FSC UF FREE Yes
PC-5 NOVODOR, UF FREE Yes
3/4 HR C-LABEL, 1 HR B-LABEL, 1-1/2 HR B-LABEL Yes
SLC-5 STAVE Yes
SCLC-5 COMPOSITE LUMBER Yes
SLC-5 FSC STAVE Yes
 
Step 4: Calculate your LEED Credit:      Calculate
Note: If you change totals click Calculate again to update the credits
 
 
LEED Credits
Recycled Content: 0
Regional Materials: Enter JobSite Zip Code to Calculate this Credit
Certified Wood Component:     (0.00%) 0
Optional Steps

Clear   Project Data
 
Low Emitting Materials:
 
Step 5: Print and/or Save your Project:      Print      Save Project
Special Cases
 
Credit MR-7:

If you are specifying FSC faces to gain a cost % credit, the credit cannot be calculated until the faces are orderd for the job, assuming the faces are still available at that time.

 
 
Credit MR-5:

These are estimates based on our local materials being within the 500 mile radius of both Algoma and the job site. There may need to be minor modifications if a job is close to the 500 mile limit from Algoma.

 
 
Credit EQ 4.1/4.2:

Low Emitting Material Adhesives and Sealants:
The LEED definition of indoor adhesive, sealant, and/or sealant primer is "An adhesive or sealant product applied On-Site, inside of the buildings weatherproof system. Based on that definition, the credit does not apply to adhesives or primers used by door manufacturers. If additional information on adhesives and sealants is required, contact Algoma Hardwoods.

 
 

Algoma Wisconsin
LEED Calculator
 
    MR Credit 4.1 / 4.2 Recycled Content
    10% / 20% (Post-Consumer + 1/2 Pre-Consumer)
 
Material Name Manufacturer Material Cost ($) Post-Consumer Recycled Content (%) Pre-Consumer Recycled Content (%) Recycled Content
Information Source
PC-5 NOVODOR Algoma Hardwoods Inc. 0 0 56 Algoma Hardwoods Inc.
PC-5 NOVODOR, FSC UF FREE Algoma Hardwoods Inc. 0 0 12 Algoma Hardwoods Inc.
PC-5 NOVODOR, UF FREE Algoma Hardwoods Inc. 0 0 56 Algoma Hardwoods Inc.
3/4 HR C-LABEL, 1 HR B-LABEL, 1-1/2 HR B-LABEL Algoma Hardwoods Inc. 0 0 16 Algoma Hardwoods Inc.
SLC-5 STAVE Algoma Hardwoods Inc. 0 0 14 Algoma Hardwoods Inc.
SCLC-5 COMPOSITE LUMBER Algoma Hardwoods Inc. 0 0 10 Algoma Hardwoods Inc.
SLC-5 FSC STAVE Algoma Hardwoods Inc. 0 0 14 Algoma Hardwoods Inc.
 
 
 
  Recycled Content Calculations  
 
  Total Value ($) Post-Consumer Content 0  
  Total Value ($) Pre-Consumer Content 0  
    --------  
  Total Combined Recycled Content Value:
(Post-Consumer + 1/2 Pre-Consumer)
0  
 

Algoma Wisconsin
LEED Calculator
 
    MR Credit 7: Certified Wood

    NOTE: If you are ordering FSC faces to get cost based FSC credits the calculations must be done after veneer is ordered
Product Name Vendor Product Cost ($) Wood Component Percentage (%) FSC Certified Wood Percentage (%) or Wood Component Recycled Content
Information Source
PC-5 NOVODOR, FSC UF FREE Algoma Hardwoods Inc. 0 100 82 Algoma Hardwoods Inc.
SLC-5 FSC STAVE Algoma Hardwoods Inc. 0 100 85 Algoma Hardwoods Inc.
 
 
 
  Certified Wood Calculations  
 
  Total Value of Wood Componets: 0  
  Total Value of FSC Certified Wood Components: 0  
    --------  
  FSC Certified Wood Value as a Percentage of Total new Wood-Based Cost: 0.00%  
  Algoma Hardwoods Inc. Chain-of-Custody Number: SW-COC-000342  
 

Algoma Wisconsin
LEED Calculator
 
    EQ Credit 4.4: Low-Emitting Materials: Composite Wood & Argifiber Products-No Added Urea-Formaldehyde Resin

    SEE CHECK PURCHASE ORDER BELOW**
 
Product Manufacturer Product Name/Model Product Ordered Contains
No Added Urea-Formaldehyde
Source of Compliance
Statement
Algoma Hardwoods Inc. PC-5 NOVODOR FALSE Algoma Hardwoods Inc.
Algoma Hardwoods Inc. PC-5 NOVODOR, FSC UF FREE TRUE FALSE Algoma Hardwoods Inc.
Algoma Hardwoods Inc. PC-5 NOVODOR, UF FREE TRUE FALSE Algoma Hardwoods Inc.
Algoma Hardwoods Inc. 3/4 HR C-LABEL, 1 HR B-LABEL, 1-1/2 HR B-LABEL TRUE FALSE Algoma Hardwoods Inc.
Algoma Hardwoods Inc. SLC-5 STAVE TRUE FALSE Algoma Hardwoods Inc.
Algoma Hardwoods Inc. SCLC-5 COMPOSITE LUMBER TRUE FALSE Algoma Hardwoods Inc.
Algoma Hardwoods Inc. SLC-5 FSC STAVE TRUE FALSE Algoma Hardwoods Inc.
 
 
 
 

**IF YOUR PURCHASE ORDER INDICATES YOU HAVE ORDERED UREA-FORMALDEHYDE RESIN FREE DOORS THEN YOU CAN CHECK THE 'YES' BOX ON THE LEED SUMBITTAL SHEET FOR EQ CREDIT 4.4

 
 

Algoma Wisconsin
LEED Calculator
 
    MR Credit 5.1 & 5.2: Regional Materials

    NOTE: THIS CREDIT MAY HAVE TO BE MODIFIED AT COMPLETION OF JOB
     (THESE ARE ESTIMATES IF JOB IS WITHIN 500 MILES OF ALGOMA HARDWOODS)
Product Name Vendor Total Product Cost ($) Percent Compliant Compliant Product Value Harvest Distance Miles Manufacture Distance Miles Recycled Content
Information Source
PC-5 NOVODOR Algoma Hardwoods Inc. 0 70% 0 <500 0 Algoma Hardwoods Inc.
PC-5 NOVODOR, FSC UF FREE Algoma Hardwoods Inc. 0 70% 0 <500 0 Algoma Hardwoods Inc.
PC-5 NOVODOR, UF FREE Algoma Hardwoods Inc. 0 70% 0 <500 0 Algoma Hardwoods Inc.
3/4 HR C-LABEL, 1 HR B-LABEL, 1-1/2 HR B-LABEL Algoma Hardwoods Inc. 0 49% 0 <500 0 Algoma Hardwoods Inc.
SLC-5 STAVE Algoma Hardwoods Inc. 0 27% 0 <500 0 Algoma Hardwoods Inc.
SCLC-5 COMPOSITE LUMBER Algoma Hardwoods Inc. 0 87% 0 <500 0 Algoma Hardwoods Inc.
SLC-5 FSC STAVE Algoma Hardwoods Inc. 0 8% 0 <500 0 Algoma Hardwoods Inc.
 
 
 
  Regional Materials Calculations  
 
  Total Value ($) of Locally manufactured and extracted materials: Enter JobSite Zip Code to Calculate this Credit